Inkbird All-Purpose Digital Temperature Controller Fahrenheit & Centigrade Thermostat w Sensor Cooling/Heating
Output: 2 Relays
Temperature Measuring Range: -50~210°F / -50~99°C
Resolution: 0.1°F / 0.1°C
Accuracy: ±1°F (-50~160°F) / ±1 °C (-50~70°C)
Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC)
Ambient Temperature: 0~60°C
Storage Temperature: -30~75°C
Relative Humidity: 20~85% (No Condensate)
Front Panel Size: 75(L)*34.5(W)mm Mounting Size: 71(L)*29(W)mm
Product Size: 75(L)*34.5(W)*85(D)mm Sensor Length: 2m (include the probe)
1x ITC-1000 Temperature Controller 110v with 6.67 NTC Sensor
Q1: How to wire? I can hear the relay inside the unit click, but I can’t get any voltage on the cool or heat terminals.
A1: IMPORTENCE: Please don’t forget to wire the Heating and Cooling device to Power supplier and make a circuit.
Q2: The cooling device doesn’t work, even though the temperature reaches TS+DS, and the Cool indicator lamp is flashing.
A2: The cooling has delay function. If you want to run immediately and don’t need the PT function, you can set PT=0.